We’ve all seen the classic scene where a person sits on a chair and uses a lever to lift it. This can be done by pushing the lever in one direction or pulling it in another. The lever does the work by causing the chair to lift.
When the lever is in place, the chair does not roll. When moved in one direction, the chair moves up; when moved in the other direction, the chair moves down. Sitting in low office chairs can have a bad impact on your spine health. A wrong sitting posture can also put pressure on your legs and feet.
However, some older non-pneumatic chairs are non-adjustable. And the height of these chairs can be raised manually. Here we will show you “how to raise an office chair without a lever”.
How does the Lever of an Office Chair Work?
When you set up an office chair, the lever on the back of the chair helps you set the height. It allows you to move the chair in all directions.
The lever is attached to a rod that is connected to the base of the chair. You must know how to use it. If you don’t know how to use it, you could hurt yourself. The lever should be turned to the side, and you can move the chair up or down by turning the lever.
Non-Pneumatic Office Chair
There are many types of office chairs available in the market today. Some are designed for long-term use while others are meant for short-term use.
A non-pneumatic office chair is a type of chair that does not require the use of air pressure. This type of chair can be adjusted for height by the user.
Height Adjustment in Old Non-Pneumatic Office Chair
A non-pneumatic chair is a common workplace item that is often found in offices, conference rooms, living rooms, and other spaces where people work for long periods.
These office chairs are usually fairly comfortable to sit in, but they can be a little tricky to adjust. If you have one of these chairs at home or in your office, you may have noticed that the back of the chair can sometimes come up a little high when you sit down.
You can adjust the height of the chair by loosening the screws that hold the chair’s seat to the base.
You can adjust the chair’s height once the lock has been loosened. The chair should be turned clockwise to lower it. If you keep your foot at the base of the chair, the seat won’t turn.
Measure the number of full turns you will need to get the height you want. It’s a good idea to sit on a chair and test it.
How to Raise an Office Chair (Non-Adjustable)
Raising a non-adjustable office chair is a bit of a challenge. It’s something that can be done by any average person. You don’t need to be a carpenter or have a fancy workshop to do it. You don’t even need a special tool.
So, if you’re interested in raising a non-adjustable office chair, then keep reading.
Use Seat Cushions for Chair Height
If you’re tired of lifting heavy chairs and struggle with your posture, you’ll love this trick! By simply using two standard office chair cushions, you can easily adjust the height of the chair.
You can reupholster the office chair with an elevated seat cushion so that you can sit comfortably and work in a more ergonomic position.
Strap the Chair
Strapping can help in raising and lowering a chair’s height.
1. Place one end of the strap under the back of the office chair and the other end over the arm of the chair.
2. Pull the strap tight, so the chair raises a few inches.
3. Release the strap and the chair will return to its original height.
Platforms or Elevation Blocks to Raise an Office Chair
The platforms or elevation blocks to raise an office chair are very versatile and can be used for many different types of chairs.
They are also extremely easy to use and can be used to raise an office chair without having to hire a professional. They can also be used to raise a chair that is not in the ideal position.
These blocks can be used to raise a chair to an appropriate height for the person using it. They can also be used to help a person with limited mobility, or who has arthritis, get into a sitting position. There are also several benefits to using platforms or elevation blocks to raise a chair.
Stools and Stilts to Raise an Office Chair
To raise the office chair height manually get a stool or build one for yourself.
You don’t have to spend a fortune to make your stool.
1. Cut two wood blocks or planks to the desired size.
2. Attach the wood blocks or planks using screws or nails.
3. Paint or stain the stool to your desired color. Test it under your chair.
Fix Larger Casters or Wheels
The bigger wheels can help in increasing the height of a non-adjustable office chair. Some people find that the bigger wheels on an office chair make it easier to move around, especially when the chair doesn’t have an adjustable height.
Most office chairs have a mechanism that allows you to remove the wheels from your office chair without having to get out of your seat.
Attach Adjustable Legs
Even though there are benefits to using an adjustable desk, it’s better to purchase a sturdy desk that doesn’t need repairs. You don’t want to be spending money on something that isn’t going to last.
The best way to avoid this issue is to purchase a sturdy adjustable desk. These desks don’t need to be adjusted, and they are typically more durable than desks that need to be adjusted.
Replace a Broken Chair Lever
The lever on a pneumatic office chair is used to inflate the air cushions on your chair. If the lever is malfunctioning, then the air cushion won’t inflate properly and your chair will feel uncomfortable. There are a few ways to solve this problem.
First, you can purchase a new lever. This is not a cheap option as it will cost you around $60-100. Another way is to use a screwdriver to fix the lever.
You might be surprised to find out that it’s possible to adjust your office chair using a makeshift adjustment lever. It’s quite easy, and it’s the best way to get your chair up and down if the lift isn’t working properly.
To fix a lever mechanism you need a little bit of improvisation. To adjust, you’ll need to find the very top of the cylinder and then raise or lower the chair by turning the knob.
- The first step is to find the tip of the cylinder.
- There is a small protruding pin that releases the piston at the bottom of the pneumatic lift.
- When this pin is pushed down, it releases the piston at the bottom of the pneumatic lift.
- If the piston is released, you can then raise or lower your office chair.
How does the Low Chair Height Affect You?
Although being a workaholic can lead to an increased risk of heart disease. But most of us spend many hours at work sitting in chairs. But what if your chair is too low?
You may find yourself struggling to reach your desk or your laptop, and it could be uncomfortable to sit in.
One of the biggest problems is that if your chair is too low, it can cause back pain. When you are sitting in an office chair for long periods, the weight of your body can put pressure on the lower spine.
This is especially true when you are in a chair with a low-sloped seat. A low-sloped seat can cause a person to sit in an unnatural position.
Our Final Say
The placement of your chairs will affect the ergonomics of your workplace and hence, your safety level. To raise an office chair height without a lever; use a cushion, wooden block elevation, straps, or bigger casters to raise the office chair. You can also adjust the chair’s back and seat angle to suit your comfort.
Frequently Asked Questions
1. How do you raise an old office chair?
The best way to raise an office chair without a lever is to use cushions or elevation blocks.
2. What do you do if your office chair is too low for your desk?
You can use a jack to lift the chair off the floor. You can also put a small book under the seat and raise it.
3. How does chair height adjustment work?
It works based on a pneumatic gas cylinder.
4. What can be affected by a poorly adjusted office chair?
It can cause back pain and spine problems.